A Schaltbau Company

Contactors for industrial trucks

Contactors, C130/180 series

Combination contactors C130

Suitable for taking over all kind of electric functions that may occur between the power supply and drive system of an industrial truck.

Combination of line contactor and manual cut-off switch, optional with fuse holders and/or horn.

Contactors, C110B/300 series

DC Contactors C110B

Due to economical material consumption (e.g. using as little silver and copper as possible), Schaltbau can offer these environmentally friendly switching devices at a reduced price – without compromising performance.

Contactors, C100/320 series

Battery Contactors C100

The single pole C100 Series contactors are designed for use as main contactors of materials handling vehicles and other battery-powered vehicles.

AFS717 // DPDT = 2 x SPDT 150A

AFS Series

AFS Series contactors are designed for use with all kinds of electric vehicles in material handling. Coming with double-break contacts the DC changeover and reversing contactors are designed for switching resistive, capacitive and inductive loads. Especially in the After Sales Market the contactors are much demanded as replacement and new contactors for most leading brands of trucks.

Combination contactors C130

Suitable for taking over all kind of electric functions that may occur between the power supply and drive system of an industrial truck.

Combination of line contactor and manual cut-off switch, optional with fuse holders and/or horn.

Contactors, C130/180 series

DC Contactors C110B

Due to economical material consumption (e.g. using as little silver and copper as possible), Schaltbau can offer these environmentally friendly switching devices at a reduced price – without compromising performance.

Contactors, C110B/300 series

Battery Contactors C100

The single pole C100 Series contactors are designed for use as main contactors of materials handling vehicles and other battery-powered vehicles.

Contactors, C100/320 series

AFS Series

AFS Series contactors are designed for use with all kinds of electric vehicles in material handling. Coming with double-break contacts the DC changeover and reversing contactors are designed for switching resistive, capacitive and inductive loads. Especially in the After Sales Market the contactors are much demanded as replacement and new contactors for most leading brands of trucks.

AFS717 // DPDT = 2 x SPDT 150A

Battery contactors with high switching capacity

High-efficiency forklifts must be capable of lifting loads of up to eight tons to the maximum height in no time. In addition to that, they should be quiet and clean. That is why electric forklifts are the first choice nowadays.

Simultaneous lifting and travelling as well as emergency stops require a switching capacity of 48 V typ. and 300 A max. from the main contactor. Schaltbau DC contactors are ideally suited to handle these requirements reliably. They come with optional magnetic blowout by which the arc is driven away from the contacts into an area where it is stretched, cooled and extinguished in the end.

It results in lower thermal stress of the contactor’s entire contact system. To handle the higher switching requirements in case of an emergency stop Schaltbau DC contactors feature double-break contacts realized by means of a solid contact bridge. Thus the contact is opened at two points generating two smaller arcs instead of one big one which can be quenched more quickly and easily.

All-in-one Devices

Schaltbau all-in-one devices are a combination of a DC line contactor and a manual cut-off switch – thus obviating the need for wiring individual parts and reducing assembly time for manufacturers of industrial trucks. The equipping can be further customized by integrating various fuses and/or an optional horn. Featuring double-break contacts and magnetic blowout, the combi contactors can be relied on for excellent switching performance.